Certainly one thing that most of what you are using your PC or Laptop running Windows will not at least once met the major errors that sometimes you won’t know the cause and how to fix it.
One very common user errors that it is “100% full disk error on Windows 10”. This is a very nasty bug that if had you computer may be “simple, gavran, lag lag even you could not do anything”. Is more dangerous if not soon remedied it can render your computer’s hardware is quickly broken than usual.
So the cause and how to fix this how full disk then invite you next view the content below.
100% Full Disk error causes Windows 8.1 or Windows 10
This is 100% full error error disk usage on the operating system and often appears in Windows 8.1 and Windows 10 that the cause is mainly as follows:
- Hardware errors: Likely due to faulty HDD Bad Sector, CPU too hot due to long on the toilet or dried glue no heat sink.
- Errors caused by viruses: This cause also quite often happen if the computer you regularly use pirated software or do not install the antivirus software protection.
- System disk drive capacity used the most: Full Disk errors will certainly appear as if the disk containing the operating system are close to running out of capacity and it will often appear while using the computer should sometimes be very a session.
- Windows system errors: Due to the new software installation and cause conflicts with other programs.
Directory of the Windows operating system because of the cause which contains strange files cause lỗi full 100% disk usage.
The synthesis of how to fix error 100% Full Disk
1. Increasing the capacity of the hard drive to install the Windows operating system
If the drive to install the Windows operating system are in a State of full amount then 100% full disk errors will certainly appeared, with this situation you just need more space for the drive by increasing capacities for the partition as garbage, cleanup, find duplicate files in the C drive, delete unnecessary files in the Download directory, ….
2. Check the drive by CheckDisk
To check the drive the computer with this tool, you need to open a CMD window (Command Prompt) with Admin rights by entering “CMD” line and the search box in the Taskbar >> Select right-click Command Prompt and click Run as administrator.
Next up, in the interface window Command Prompt type the command line below and then Enter.
Chkdsk/f/r c: '
With “C:” drive to install the Windows operating system on your computer. Then, a message indicates that the disk drive that contains the Windows being used, to CheckDisk can run it requires restarting the computer. You just press Y and then Enter .
CheckDisk process check your computer is relatively long, so you should wait patiently until the process ends.
3. Turn off programs running with Windows
To open the management interface the program runs, you can select the right mouse button on Taskbar, and select Task Manage or can press the key combination shortcuts is a quick Ctrl + Alt + Delete
Next, select the card Startup to proceed off the programs that you do not know or are not used to and just leave a number of application or used as Unikey, Internet Download Mananger, … To shut down a program, you just need Select the program name, and then click Disable .
In addition, you can use software like Revo Uninstaller, CCleaner, … to make off with Windows startup programs 8.1 and Windows 10 easily.
4. Turn off a few Services not essential
To turn off unnecessary services to launch the same Windows 10 can cause 100% Full Disk error, in the search box in the Taskbar >> enter the “Service” and then Enter to open the management interface Services.
In the window that appears, you proceed to search the line Connected User Experiences and Telemetry Properties, Windows Search, and Superfetch. With
- Connected User Experiences and Telemetry Properties and Windows Search please change the Startup type section is Disable. Press OK to save.
- Superfetch will choose is Manual. Press OK to save.
5. Use the Troubleshooting features of Windows
You can quickly search this feature through the search box or can access the Control Panel and then type “Troubleshooting” in the search box.
Next, select the line System and Security , and then select next on the line of System Maintenance.
Then press Next and then select the >> on the first line is Try troubleshooting as an administrator to this utility automatically detects errors and automatically fix this help you. In case of errors full 100% disk usage is still not fixed, you can further references the way below
6. Turn off Maintenance and Windows SmartScreen
First, you need to Control Panel select >> System and Security >> in Action Center.
Turn off Maintenance
To disable the feature Maintenance, you select on the small arrow to the right of the line Maintenance >> Select Settings. Next, select the on line Never check for solutions (Not recommended) and press OK to save. If you use more than 10 new Windows operating system, can refer to the how to turn off Maintenance as follows:
Step 1: Press Windows Key + R and type regedit and press Enter to open the Registry Editor.
Step 2: navigate to the path consisting of the following:
Step 3: Right click on Maintenance and then select New > DWORD (32-bit) Value. Proceed to create a new Dword in this Maintenance are called MaintenanceDisabled.
Step 4: The name of the new DWORD to be created is MaintenanceDisabled and hitthe Enter n.
Step 5: Double click on MaintenanceDisabled then change the value of it to 1 and click OK to turn off Automatic Maintenance. Finally, close the Registry Editor, and then restart your PC to change the setting.
If in the future, you need to enable Automatic Maintenance then just change the value of MaintenanceDisabled to 0.
Turn off Windows feature SmartScreen
Similarly, to turn off SmartScreen Windows you select in the line Change Windows SmartScreen Settings on the left side. A new window appears, select the box Don’t do anything (Turn off SmartScreen Windows) and press OK to save.